Filter
Top Products
10
Making connectionsDX-40L261A12
Using coaxial (good)
To connect a cable or satellite box using coaxial:
1 Turn off your TV and all connected equipment.
2 Connect the incoming cable from the cable wall jack to the
cable-in jack on the cable or satellite box.
3 Connect a coaxial cable (not included) to the ANT/CABLE IN jack
on the back of your TV and to the coaxial out jack on the cable or
satellite box.
4 Turn on your TV, then turn on the cable or satellite box.
5 Go through the setup wizard on page 16.
Connecting an antenna or cable TV (no
box)
To connect an antenna or cable TV (no box):
1 Turn off your TV and all connected equipment.
2 Connect a coaxial cable to the ANT/CABLE IN jack on the back of
your TV and to the antenna or cable TV wall jack.
3 Turn on your TV.
4 Go through the setup wizard on page 16.
Notes
• Use a coaxial cable to eliminate interference and
noise from radio waves.
• Do not bundle the coaxial cable with the power
cord or other cables.
COMPONENT IN
Cable or
satellite box
Back of TV
Coaxial cable
From cable TV
wall jack (75 ohm)
To Cable-in jack on the
cable TV or satellite box
Notes
• Use a coaxial cable to eliminate interference and
noise from radio waves.
• Do not bundle the coaxial cable with the power
cord or other cables.
• If the antenna is not installed correctly, contact
qualified service personnel to correct the
problem.
COMPONENT IN
Back of TV
Coaxial cable
DX-40L261A12_11-0396_MAN.book Page 10 Wednesday, June 15, 2011 11:34 AM