Filter
Top Products
Maintaining
29
DX-40L261A12
2 Press or to highlight Setup, then press . The Setup menu
opens.
3 Press
or to highlight OSD Language, then press or to
select the language you want.
4 Press EXIT to close the menu.
Changing the DPMS setting
Your TV must be set to VGA to use this setting.
Your TV turns off after 10 minutes if a signal is not detected from the
computer. When DPMS is set to ON, the TV turns on when the
computer comes out of sleep mode. When set to OFF, the TV will not
turn on when the computer comes out of sleep mode.
To change the DPMS setting:
1 Press MENU. The on-screen menu opens.
2 Press
or to highlight Setup, then press . The Setup menu
opens.
3 Press
or to highlight DPMS, then press or to select On
(to enable), or Off (to disable).
4 Press EXIT to close the menu.
Restoring settings to the defaults
When you restore default settings, all the settings you have customized
(except the password and parental rating) are reset.
To restore settings to the defaults:
1 Press MENU. The on-screen menu opens.
2 Press
or to highlight Setup, then press . The Setup menu
opens.
3 Press
or to highlight Reset Default, then press ENTER. A
confirmation box opens.
4 Press
or to select Yes (to reset) or No (to not reset), then
press ENTER.
5 Press EXIT to close the menu.
Maintaining
• Do not use your TV in areas that are too hot or too cold, because
the cabinet may warp or the screen may malfunction. Your TV
works best in temperatures that are comfortable to you.
• Storage temperatures are 32° to 122°F (0° to 50°C).
• Working temperatures are 41° to 104°F (5° to 40°C).
• Do not place your TV in direct sunlight or near a heat source.
Cleaning the TV cabinet
Clean the cabinet with a soft, lint-free cloth. If the cabinet is especially
dirty, moisten a soft, lint-free cloth in a weak detergent solution,
squeeze the excess moisture from the cloth, then wipe the screen or
cabinet with the cloth. Use a clean cloth to dry the screen or cabinet.
Cleaning the TV screen
Clean the screen with a soft, lint-free cloth.
OSD Language
Aspect Ratio
DPMS
Time Setup
Caption
Parental
Reset Default
Select
Exit
Back
Video Audio Setup TV
English
Wide
On
Enter
Picture Mode Energy Savings
Brightness
Color
Tint
Sharpness
Color Temperature Cool
Advanced Video
Select
Exit
Back
Video Audio Setup TV
Move
47
53
0
4
Contrast
56
OSD Language
Aspect Ratio
DPMS
Time Setup
Caption
Parental
Reset Default
Select
Exit
Back
Video Audio Setup TV
English
Wide
On
Enter
Picture Mode Energy Savings
Brightness
Color
Tint
Sharpness
Color Temperature Cool
Advanced Video
Select
Exit
Back
Video Audio Setup TV
Move
47
53
0
4
Contrast
56
OSD Language
Aspect Ratio
DPMS
Time Setup
Caption
Parental
Reset Default
Select
Exit
Back
Video Audio Setup TV
English
Wide
On
Enter
DX-40L261A12_11-0396_MAN.book Page 29 Wednesday, June 15, 2011 11:34 AM