Dynex DX-60D260A13 Flat Panel Television User Manual


 
20
Understanding the basicsDX-60D260A13
If your TV is connected to an antenna, cable TV
(no box), or cable or satellite TV box using a
coaxial cable, select TV.
If your TV is connected to a cable or satellite box
using an HDMI cable or HDMI cable with a DVI
adapter, select HDMI1, HDMI2, or HDMI3.
If your TV is connected to a cable or satellite box
using a component video cable, select
COMP/AV.
If your TV is connected to a cable or satellite box
using a composite video cable, select COMP/AV.
Understanding the basics
Turning your TV on or off
To turn your TV on or off:
1 Make sure that the power cord is connected to a
power outlet.
2 Press (Power) to turn on your TV. The power
indicator LED turns off.
3 Press (Power) again to turn off your TV. Your TV
enters Standby mode and the power indicator turns
red.
Selecting the video input source
To select the video input source:
1 Turn on your TV, then press INPUT. The INPUT
SOURCE list opens.
2 Press or to highlight the video input source,
then press ENTER.
You can also press a direct input button on your
remote control to select the video input source.
Press TV to select TV (if your TV is connected to
an antenna, cable TV (no box), or cable or
satellite TV using a coaxial cable).
Press VIDEO to select component or composite
input.
•Press HDMI one or more times to select one of
the HDMI inputs.
•The ACC button has no function.
Using the on-screen menus
Picture menu (TV mode)
Audio menu (TV mode)
Settings menu (TV mode)
Channels menu (TV mode)
Warning
When your TV is in standby mode, it is still receiving
power. To completely disconnect power, unplug the
power cord.
Note
If your TV does not receive an input signal for several
minutes, it automatically goes into standby mode.
Notes
Depending on the signal source selected, you
may see different options on your screen. The
following menus are shown in TV mode.
Menu items that are not selectable are grayed
out.
Menus in this manual are described in TV mode,
unless otherwise indicated.
The screens shown in this manual are for
explanation purposes and may vary from the
actual screens on your TV.
12-1236_DX-60D260A13 MAN_V1_EN.book Page 20 Thursday, March 21, 2013 8:17 AM