Filter
Top Products
Replacing a Power Supply/System Cooling Module
3-21
Servicing a DAE2
2. Turn the latch counterclockwise to release the module, and then
remove the power/cooling module as shown in Figure 3-16.
To protect a running system from overheating, the enclosure will time
out unless you replace the power/cooling module within two minutes.
Figure 3-16 Removing a Power Supply/System Cooling Module
3. Gently insert the new power/cooling module into the enclosure,
as shown in Figure 3-17. Be sure the module is completely seated.
Figure 3-17 Installing a Power Supply/System Cooling Module
EMC2175
Latch
EMC2224
Latch