Filter
Top Products
Enclosure Specifications
A-3
Technical Specifications
Size and Weight
Drive Type
The DAE2 uses 3.5-inch (8.75 cm) by 1.0-inch (2.54 cm) disk drives.
Standard, Fibre Channel versions are 12-volt, and support the Fibre
Channel interface. ATA versions are 12- and 5-volt and support the
ATA-6 interface.
Each drive slot provides an average maximum of 16 W drive module
power.
Refer to the EMC Storage Systems CX-Series Disk and Software Support
Matrix for a list of supported drives.
LCC FC-AL Interface
Connectors are shielded HSSDC (High Speed Serial Data Connector).
Copper Cabling
Requirement Measurement
Height 133.35 mm (5.25 in)
3 NEMA units including mounting hardware
Width 450 mm (17.72 in)
Depth 603.25 mm (23.75 in)
Weight 43.2 kg (95.3 lbs) maximum configuration
1.1 kg (2.4 lbs) per FC disk module;
1.125 kg (2.5 lbs) per ATA module
1.4 kg (3 lbs) per link control card
4.1 kg (9 lbs) per power supply
12.7 kg (28 lbs) chassis and midplane
Type: Shielded, 150
Ω
differential, shield bonded to HSSDC plug connector
shell (360
°
)
FC-PI Standard, Revision 13 or higher
Length: 1 meter (3.3 feet) unequalized;
5 meter (16.5 feet) and 10 meter (33 feet) equalized