Filter
Top Products
Programming the Remotes 25
2. Press and hold simultaneously for at least 2 seconds one of these
combinations on the BOCS remote, to select which local device the learned
codes will be associated with:
"Local TV" and "Enter/#" for the local TV,
"CBL" and "Enter/#" for the local CBL device,
"DVD" and "Enter/#" for the local DVD device, or
"AUX" and "Enter/#" for the local AUX device.
3. The power LED will turn on.
4. Press the button that the learned code will be assigned to on the BOCS remote
(the receiving button).
5. Within 5 seconds, press the button to teach on the existing remote.
6. The power LED flashes twice if the key was successfully learned, or flashes
rapidly if learning failed. If neither of these signals occurs, press the button to
teach on the existing remote again.
7. To learn another button (or to learn the same button again if the previous try
failed), go back to step 3.
8. When you are done with all the buttons to be learned for this device, just do
nothing. The remote will exit learn mode after 10 seconds of inactivity, and the
power LED will turn off.
Have the Xtender Learn IR Codes from Another Remote
To Control Devices Plugged into the Red, Green, or Blue channel
1. Place the other remote control so that it points at the IR receive window on the
front of the Xtender – it must be within 2” of the window and pointed directly at
the window from the front. Note that the remote must remain very still and at
the same distance from the Xtender IR window.
2. Press and hold simultaneously for at least 2 seconds one of these
combinations on the BOCS remote, to select which BOCS device the learned
codes will be associated with:
"RED" and "Enter/#" for the BOCS RED channel,
"GREEN" and "Enter/#" for the BOCS GREEN channel, or
"BLUE" and "Enter/#" for the BOCS BLUE channel.
3. Continue with step 3 from the procedure above.
Unlearn IR Code(s)
You may need to unlearn previously learned IR codes if there is an error during the
learning process, or to free up "learning memory" on the remote or the Xtender.
Note: the "Scan Local Device Type or BOCS Device Type" and "Set Local Device
Type or BOCS Device Type" procedures automatically unlearn all learned IR codes
for the device whose type is set.
For BOCS Remote or Xtender to Unlearn IR Codes
1. Press and hold simultaneously for at least 2 seconds one of these
combinations on the BOCS remote, to select which device to unlearn:
"Local TV" and "Delete/*" for the local TV,
"CBL" and "Delete/*" for the local CBL device,