Filter
Top Products
Solving Problems 113
Solving Problems
If you have a problem with the TV, read any error messages on the screen and check the lights
on the front panel. Then follow the suggested solutions in these sections:
• “Responding to Screen Error Messages” below
• “Responding to TV Panel Light Indicators” on page 114
• “Basic Operation Problems” on page 116
• “Picture Problems” on page 116
• “Sound Problems” on page 117
• “TV Reception or Operation Problems” on page 118
• “Remote Control Problems” on page 118
• “Problems Viewing Photos from Cards or Discs” on page 119
• “Printing Problems” on page 119
• “Problems Saving Photos to a CD-R/RW” on page 124
• “Where to Get Help” on page 124
Responding to Screen Error Messages
Message Action
Replace the Lamp The projection lamp is almost burned out.
Order replacement lamp number ELSLP1, then follow the steps on page 101
to replace it.
The TV is overheating. The TV is overheating and the lamp has turned off automatically.
Turn off the TV and let it cool for a few minutes. Make sure there is plenty of
space around the TV and that none of the ventilation slots are obstructed. If
necessary, clean the TV’s air filter, as described on page 99. Then turn the TV
back on. If it continues to overheat, contact EPSON as described on
page 124.