Epson LS57P1 Projection Television User Manual


 
114 Solving Problems
Responding to TV Panel Light Indicators
Lamp and Power light status
Lamp light Power light Status
Off Green Ready
The TV is operating normally.
Off Green flashing Warm-up mode
After a moment, your image will appear.
Off Orange flashing Cool-down mode
Wait until the
Power light stops flashing. When it lights orange
without flashing, you can turn the TV back on or unplug it.
Off Orange Standby mode
To turn the TV back on, press the
Power button. If you need to
disconnect the power, you can unplug the TV.
Orange flashing Any state Lamp replacement warning
The projection lamp is almost burned out. You may also see a
message on the screen.
Obtain a replacement lamp, then follow the steps on
page 101 to replace it.
Red Red Lamp error
The projection lamp has burned out or has another problem.
Obtain a replacement lamp, then follow the steps on
page 101 to replace it.
Red flashing Red Lamp cooling or open cover error
Make sure the lamp cover is closed completely.
If the cover is closed, the lamp may not have cooled
completely before the cover was opened. Wait a few minutes
until the fan stops running, then unplug the TV, plug it back in,
and press the
Power button to turn on the TV. If the error
persists, contact EPSON as described on page 124.
Orange Red High temperature warning
The TV is overheating and the lamp is turned off automatically.
Turn off the TV and let it cool for a few minutes. Make sure there
is plenty of space around the TV and that none of the
ventilation slots are obstructed. Then turn the TV back on. If it
continues to overheat, contact EPSON as described on
page 124.
Power
light
L
amp
light