EDR910_1610_ma_en_rev1 00 - 30 -
3.3 RECORDING MENU
Define the following settings in the recording menu:
(1)TIME STAMP: ON: Recording is overlaid by time and date.
OFF: Recording doesn’t provide time/date stamp.
(2) TIME STAMP POS.: TOP: Time / date is displayed at the top screen
margin.
BOTTOM: Time / date is displayed at the bottom
screen margin.
(3) WATERMARK : ON: Recording is overlaid by a visible watermark
("W").
OFF: No watermark.
(4) RESOLUTION:
DVR PAL recording resolution is adjustable as follows:
720x288 (Half D1), Default setting,
total recording rate 50 IPS
720x576 (D1) , total recording rate 25
or 360x288 (CIF) , total recording rate 100 IPS
(5) RECORD MODE: REWRITE: If the harddisk is full, the DVR starts to
overwrite the harddisk, previous recordings
are deleted automatically.
STOP: If the harddisk is full, the DVR stops
recording (for signalling, refer to
WARNING menu).
(6) PRE-ALARM: ON: a pre-alarm record is provided for motion
and contact alarms (5~10 sec depending on
recording settings)
OFF: no pre-alarm record
RECORDING
TIME STAMP OFF
TIME STAMP POS. BOTTOM
WATERMARK OFF
WATERMARK POS. TOP
RESOLUTION 720X288
RECORD MODE REWRITE
PRE-ALARM OFF