EDR910_1610_ma_en_rev1 00 - 54 -
PLAYBACK
5. PLAYBACK
5.1 PLAYBACK WITHOUT SEARCH FUNCTION
(1) Playback
Press the PLAY key to switch the DVR to playback mode. Depending on the “QuickPlay”
function settings (see SYSTEM menu), playback starts at one of the following positions:
QuickPlay OFF: playback starts at the last playback position
QuickPlay ON: playback starts 5 ~ 60 min (definition in SYSTEM menu) before
current recording position
(2) STOP
Press the STOP key to stop the playback mode.
(3) Fast forward / reverse
Use the JOG/SHUTTLE to control the playback speed in playback mode.
Turn the SHUTTLE clockwise for fast forward playback.
Depending on the shuttle speed, the playback speed increases to
2, 4, 6, 8, 16, 32 or 600x.
Turn the SHUTTLE counter-clockwise for normal or fast reverse
playback. Depending on the shuttle speed, the playback speed
increases to 2, 4, 6, 8, 16 or 600x.
Use the ENTER key to lock the fast playback search and the SHUTTLE or PLAY key to
unlock the fast playback search.
NOTE: The real playback speed of 600x mode depends on the recording settings. In this
mode the playback jumps from one recording segment to the next one. So the real
playback speed depends from the settings for record rate and in case of event recording
from the number of events.
PLAY
STOP
PLAY