EDR910_1610_ma_en_rev1 00 - 56 -
5.2 PLAYBACK SEARCH
SEARCHSEARCH
Press the SEARCH key to enter the search menu.
NAVIGATION:
Use the JOG to select values or entries.
Use the ENTER key to go to the next menu item and the DISPLAY key to go to the
previous menu item.
Press the SELECT key to confirm a selection.
Press the MENU key to leave the search menu.
(1) TIME / DATE SEARCH
Select TIME/DATE in the first row of the search menu to enter the requested playback
position in the following rows.
The period available on the connected harddisks is indicated in the START/END TIME
field. Select the respective harddisk in the DISK NO field.
The values in the EVENT row cannot be changed upon time/date search.
The bottom table further shows the total capacity of the used harddisk, its current
temperature and the timeframe of available recordings.
ATTENTION: When searching for a playback position just before current recording
position, it may occur that this position isn’t available for playback yet (in case the
recording segment hasn’t been closed yet). Playback then starts at the next possible
position.
SEARCH MENU
METHOD TIME / DATE
DATE 11-09-2005 FR
TIME 00:33:23
EVENT A/M/V
DISK NO 01
NO SIZE(GB) °C START / END TIME
01 152 42 10-09-2005 07:33:23
14-09-2005 06:53:11