Filter
Top Products
EDR910_1610_ma_en_rev1 00 - 57 -
(2) EVENT SEARCH
Enter EVENT in the first row of the search menu if you search for specific events such as
alarm, motion detection or video loss.
Preselect the type of event to be listed in the EVENT row. The following types of event
are available:
Display Description
ALARM Alarm events (alarm contacts and system alarms)
MOTION Motion detection
VLOSS Video loss
A / M Alarm and motion detection
A / V Alarm and video loss
M / V Motion detection and video loss
A / M / V All events (alarm, motion detection, video loss)
The TIME and DATE rows are inactive for this search mode.
The period available on the connected harddisks is indicated in the START / END TIME
field at the bottom. Only HDD1 is available in the DISK NO field.
Having selected the type of event, press SELECT to start the event list showing 16
entries per page (640 pages max.).
Use either the Shuttle (clockwise) or the COPY key to browse the pages; use either the
SHUTTLE (counter-clockwise) or the DISPLAY key to browse backwards.
After selecting the type of event with the JOG and having confirmed your selection with
the ENTER key, the DVR switches to playback mode.
SEARCH LIST
00001 M08 10-09-2005 10:11:33
00002 M01 10-09-2005 12:13:34
00003 M08 10-09-2005 12:13:39
00004 M04 10-09-2005 10:14:55
00005 M08 10-09-2005 10:15:33
00006 M03 10-09-2005 10:23:34
00007 V01 10-09-2005 10:22:12
00008 TN 10-09-2005 10:50:45
00009 M01 10-09-2005 10:54:35
00010 M03 10-09-2005 11:13:35
00011 M03 10-09-2005 11:15:24
00012 M04 10-09-2005 11:18:37
00013 M08 10-09-2005 12:11:34
00014 M01 10-09-2005 13:33:25
00015 M01 10-09-2005 14:09:11
00016 M08 10-09-2005 15:11:27
The type of event is indicated next to the
consecutive number:
A: Alarm (Alarm contact) + contact
number;
M: Motion detection + camera number;
V: Video loss + camera number;
TN: Start normal recording;
Tn: Scheduled recording, n=1~8;
PL: Power loss;
RTN: Automatic recording restart after power
loss;
RTn: Automatic scheduled recording restart
after power loss, Timer n=1~8.
PH (Physical Head): Physical HDD initial
position;
LH (Logical Head): Logical HDD initial
position upon rewriting.
F1, F2: Fan failure fan 1 / 2
OT: HDD overtemperature