Filter
Top Products
CHAPTER 4 Backup Server Error Messages
715
4.25.2 2 Device `%1!': %2! is an inappropriate density value
for this device.
Explanation: Digital OpenVMS only: the density
value specified in the dump or load command is not
valid. Expected values are: none specified, 800, 1600,
6250, 6666, 10000, and 38000.
4.26.2 2 Volume validation error: failed to obtain device
information, device: %1! error: %2!.
Explanation: Backup Server is unable to sense the
type of a given device. Verify that the device is of a
legal type and that the Backup Server process has
operating system permission to access it.
4.27.2 2 Volume validation error: attempt to close %1! returned
%2!.
Explanation: A UNIX file failed to close. The first
parameter is the file name and the second is the UNIX
error message that was returned.
4.28.2 2 Device `%1!': set mode failed on channel %2!; status
= 0x%3!.
Explanation: Digital OpenVMS only: could not set
device density. The “status” line will contain the
operating system error code.
4.29.2 2 Device `%1!': sense mode failed on channel %2!;
status = 0x%3!.
Explanation: Digital OpenVMS only: could not
sense device characteristics. The “status” line will
contain the operating system error code.
4.30.2 2 Volume validation error: attempt to open %1! returned
%2!.
Explanation: Indicates an error opening or closing a
database device.
4.31.2 2 Device `%1!': failed to skip back to beginning of tape
on channel %2!; status = 0x%3!.
Explanation: Digital OpenVMS only: volume init
error. The “status” line will contain the operating
system error code.
4.32.2 2 Failed to allocate memory for tape i/o buffer.
Explanation: An unexpected condition, possibly
fatal to the session, has occurred. Error may have
occurred with any or all of usage, environment, or
internal logic. The session will exit.
Number Severity Text and Explanation