Filter
Top Products
TLP 700TV Base Features
17
C
Gain
Vid / Y
Gain
Sharp
33-1814-01 A
19
18
Figure 8. TLP 700TV Base Features
The TLP 700TV stand, which can be removed for VESA mounting, has:
q Three adjustable potentiometers — These are used to control sharpness and gain
for both S-video luminance (Y) and S-video chrominance (C). If a composite video
signal is being used, the gain is controlled by the center potentiometer (Vid/Y).
C
Gain
Vid/Y
Gain
Sharp
33-1814-01 A
Figure 9. TLP 700TV Potentiometers
r Access for disconnecting RJ-45 connectors — When RJ-45 connectors are covered
with a protective boot, it can be difficult to remove them from their sockets. The two
holes are directly underneath the two RJ-45 jacks (see gure 7). Pushing the tip of a
pen or pencil through the holes makes it easy to disconnect the RJ-45 connectors.
s Security mounting — If required, secure the unit to the desktop, using two
screws, as described on page 41.
TLP 700MV and TLP 700TV • Panel Features 10