Filter
Top Products
Trim Ring
Screws (4)
Tighten screws to
rotate locking arms.
Bezel snaps to unit
(4 plcs ea side).
Figure 31. Secure the TLP 700MV to a Wall With Locking Arms
11. If required, perform the initial calibration (see page 11).
12. Replace the bezel by pressing the catches on the bezel into the corresponding holes
on the front of the panel.
Wall Mounting the TLP 700MV with a Wall Box
The TLP 700MV can be wall mounted using either the Extron BB 700M (part number
70-690-01) or the Extron EWB 700 (part number 60-1100-0x). In either case follow the
instructions provided with the wall box.
TLP 700MV and TLP 700TV • Mounting 40