Filter
Top Products
DAY/TIME SEARCH
Day/Time Search
This searches for a specified day/time for still images to
be played back.
1
Press the SEARCH button three times during stop
mode.
ø “T/D SEARCH 01 00:00” will be displayed on
screen.
2 Press the l (or j) button to set the desired day,
then press the ENTER button.
3
Press the l (or j) button to set the desired hour,
then press the ENTER button.
4 Press the l (or j) button to set the desired minutes.
ø The setting can be made in 10 minutes
increments only.
5 Press the FF (or REW) button.
ø The desired day/time is searched and a still
image of the recording will appear on-screen.
6
Press the PLAY button.
ø Playback will start.
NOTES:
œ If the end of the tape is reached during a search, the
tape will rewind and stop. If the beginning of the tape
is reached, it will stop.
œ The alarm and day/time data are recorded on the tape
in a similar format. If they overlap, the alarm data will
have the priority. Therefore, when searching for a
day/time when an alarm recording was done, the
day/time search will not stop at the desired location. In
such a case, use alarm scan to find the desired
recording location.
œ The day/time search function may not operate
correctly if searching for a timer recording time or if
the clock on the recording VCR has been adjusted
using the CLOCK ADJUSTMENT function.
œ If a recording on a tape extends for over a one month
period, the same day may be present twice on the
tape. If such a day is searched, since there is no
month search setting, the desired day may not be
found.
œ This function does not operate when a warning
display appears on the digital display.
SECURITY LOCK
The security lock function is designed to prevent
accidental stopping of recording if the STOP button is
pressed inadvertently.
1
While holding the SHIFT « button, press the l
button.
ø “ ö ” appears on the digital display.
To cancel the security lock, while holding the SHIFT
« button, press the l button, “ ö ” will be erased
from the digital display.
NOTES:
œ While the security lock is engaged all commands,
except the one to cancel the security lock, are
disabled.
œ The security lock cannot be engaged while a menu is
displayed.
œ The security lock will be cancelled by pressing the
ALL RESET button.
NF4Q/NA (SRC-850A GB) Tue. Sept., 10/2002
28
English