Filter
Top Products
35
SXRC Remote Control
Operation
There is also a LEFT and RIGHT indicator
in the ISIS display that will light up
indicating which channel(s) (Left and/or
Right) are currently being adjusted.
If you exit the MUTE menu with any
channel(s) muted (
Mute On), the MUTE
indicator in the ISIS VFD will begin flashing
to indicate this.
The
MUTE indicator will stop flashing once you un-mute the
channel(s) currently muted.
mute MENU - Here is where you can mute each channel(s)
output on the amplifier for setup or testing purposes.
Use the
UP and DOWN keys to scroll
through
both chns, left chn and right
chn
then press the ENT key to select. SX.1
Series does not offer Left or Right Channel
option...Only Mute On or Mute Off for the entire amplifier
since it is a Mono-Block design. Skip this step and move to
next paragraph.
Use the UP or DOWN keys to select from
mute on or mute off. Press the ESC
key to save your setting and return to the
both chns, left chn and right chn
options menu. You can now select another
mute option to adjust on this amplifier if desired.
Does not apply to SX.1 Series. Pressing the ESC key at this
point on a SX.1 Series amplifier exits the MUTE menu.
When you are done adjusting the mute on
this amplifier press the
ESC key while in the
Both chns, left chn and right chn
options menu to return to the AMP ADJ menu
and choose another function to adjust.
NOTE:
While you are in the MUTE menu the
MUTE indicator on the ISIS display is lit.
This indicates you are making
adjustments in the MUTE menu.
HOME
ENT
ESC
HOME
ENT
ESC
HOME
ENT
ESC
bbotthh cchhnnss
SYS
MEM-1
GAINGAIN EQ LPF HPF KOMP
AMP1
LOCK
MEM-2 MEM-3 MEM-4
PHASE
MUTE
AMP2
LEFTLEFT RIGHTRIGHT
mmuttee ooffff
SYS
MEM-1
GAINGAIN EQ LPF HPF KOMP
AMP1
LOCK
MEM-2 MEM-3 MEM-4
PHASE
MUTE
AMP2
LEFTLEFT RIGHTRIGHT
mmuttee
SYS
MEM-1
GAINGAIN EQ LPF HPF KOMP
AMP1
LOCK
MEM-2 MEM-3 MEM-4
PHASE
MUTE
AMP2
LEFTLEFT RIGHTRIGHT