Filter
Top Products
38
SXRC Remote Control
Operation
pink noise MENU - Here you can activate the integrated pink
noise generator of the selected SX Series amplifier and is very
useful for testing and troubleshooting your system.
Pink noise is a sound made up of equal energy at all 1/3
octaves from 20 Hz to 20 kHz and sounds like the static between
radio stations.
When activated, pink noise is generated by the SX amplifier’s
DSP and fed into both the left and right channels.
Use the
UP or DOWN keys to scroll
through
noise off and noise on.
Press the ESC key to save your setting and
return to the AMP ADJ menu to select another
function to adjust.
NOTE:
When the pink noise is activated (NOISE ON) the LEFT and
RIGHT indicators on the ISIS display will
begin blinking. This indicates that the PINK
NOISE generator is active.
If you exit the PINK NOISE menu with the generator on
(
NOISE ON) the left and RIGHT indicators in the ISIS VFD will
stay flashing to indicate this.
The
LEFT and RIGHT indicators will stop
flashing once you turn off (
NOISE OFF) the
pink noise generator.
HOME
ENT
ESC
HOME
ENT
ESC
nnoiissee oonn
SYS
MEM-1
GAINGAIN EQ LPF HPF KOMP
AMP1
LOCK
MEM-2 MEM-3 MEM-4
PHASE
MUTE
AMP2
LEFTLEFT RIGHTRIGHT
nnoiissee ooffff
SYS
MEM-1
GAINGAIN EQ LPF HPF KOMP
AMP1
LOCK
MEM-2 MEM-3 MEM-4
PHASE
MUTE
AMP2
LEFTLEFT RIGHTRIGHT
REMOTE VOL MENU - Here you can choose to have the
selected SX Series amplifier’s output level controlled by the
Digital Remote Volume Control (DRVC).
If you wish to use the DRVC as a master volume control,
raising and lowering the output level of all the amplifiers, leave all
amplifiers set to
REMOTE ON. By default, all amplifiers are set to
REMOTE ON.
If you wish to use the DRVC as a bass level controller, raising
and lowering the output level on subwoofer amplifiers only, set
the REMOTE VOL to
REMOTE OFF on your non-subwoofer
amplifiers.
These are the two most common uses. You can configure
whatever combination works for your particular installation.
Use the
UP or DOWN keys to scroll
through
REMOTE ON and REMOTE OFF.
Press the ESC key to save your setting and
return to the AMP ADJ menu to select another
function to adjust.
NOTE:
While you are in the REMOTE VOL
menu the
SYS indicator on the ISIS display
is lit. This indicates you are making
adjustments in the REMOTE VOL menu.
HOME
ENT
ESC
HOME
ENT
ESC
rremmoottee oonn
SYS
MEM-1
GAINGAIN EQ LPF HPF KOMP
AMP1
LOCK
MEM-2 MEM-3 MEM-4
PHASE
MUTE
AMP2
LEFTLEFT RIGHTRIGHT