Filter
Top Products
28
Dual-Deck VCR User’s Guide
press
Select “VCR & Channel Setup”
SETUP
/ENTER
SETUP MENU
Set Timer Recording
Child Lock Off
Set Clock
DVD Setup
VCR & Channel Setup
Language/Langue/Idioma
/ To Move
RETURN to Quit
To Select
VCR & CHANNEL SETUP
VCR Plus Setup
Channel Setup
Date/Time Stamp Timer
Auto Play/Rewind Both
Record Source Auto
Panel Display Auto
To Move/ To Select
RETURN To Go Back
VCR PLUS SETUP
VCR Plus Channel List
Timer Extend Off
To Move/ To Select
RETURN To Go Back
Select “VCR Plus Setup”
Select “VCR Plus
Channel List”
VCR PLUS CHANNEL LIST
VCR+ CH LOCAL CH
01 01
02 02
03 03
04 04
05 05
/ To Move 0-9 To Change
Press RETURN To Finish
7
VCR PLUS+
This chapter provides step by step instructions for setting up and programming
VCR Plus+ recordings, a patented and simplified method of timer recording.
Follow these steps to match your local channels to the VCR Plus+
preassigned channels. This process is know as “Channel Mapping”
and must be done before you can begin using VCR Plus+.
CHANNEL MAPPING
1 OPEN “SETUP MENU”
Press SETUP/ENTER.
2 SELECT “VCR & CHANNEL SETUP”
Use the UP/DOWN arrow keys to move the
pointer to “VCR & Channel Setup,” then press the
RIGHT arrow key to select.
3 SELECT “VCR PLUS SETUP”
Use the UP/DOWN arrow keys to move the
pointer to “VCR Plus Setup,” then press the RIGHT
arrow key to select.
4 SELECT “VCR PLUS CHANNEL LIST”
Press the RIGHT arrow key to select “VCR Plus
Channel List.”
5 MAP YOUR CHANNELS
Using the worksheet on the following page,
determine the local equivalents of the VCR Plus+
channels for your viewing area. You can find this
information in your local television listings or by
contacting your local cable company.
• Use the UP/DOWN arrow keys to move up and
down the channel list and use the 0-9 keys to
edit the local channel.
• When finished, press RETURN to save and exit.
NOTE
• VCR Plus+ and PlusCode are registered trademarks of Gemstar
Development Corporation. The VCR Plus+ system is manufac-
tured under license from Gemstar Development Corporation.