Filter
Top Products
19
7 - VCR Plus+
press
press
press
MAIN MENU
1 Copy Settings
2 Playback Settings
3 Record/Edit Settings
4 Channel Settings
5 VCR Settings
6Timer Recording
7 Language/Langue
/ = Move = Sel MENU = Quit
RECORD/EDIT SETTINGS
1 Dual Recording Off
2 Date/Time Stamp Timer
3 Deck 1 Rec Source Auto
4 Deck 2 Rec Source Auto
5 8-Scene Edit List
6 Setup Titler Message
7 VCR Plus+ Setup
/ = Move = Sel MENU = Quit
/ To Move
To Correct To Select
MENU to End
VCR PLUS+ SETUP
VCR Plus Channel Setup
Timer Extend Off
Cable Box Control Off
Cable Box Code ###
Cable Box Output Line 1
VCR PLUS+ CHANNEL SETUP
01 02 03 04 05 06
01 03 03 04 05 06
Enter local channel
number using 0-9 keys
/ to Move
MENU to End
press
MENU
3
7
7
VCR PLUS+
This chapter provides step by step instructions for setting up and programming
VCR Plus+ recordings, a patented and greatly simplified method of timer recording.
Follow these steps to match your local channels to the VCR Plus+
preassigned channels. This process is know as “Channel Mapping”
and must be done before you can begin using VCR Plus+.
CHANNEL MAPPING
1 OPEN “MAIN MENU”
Press MENU.
2 SELECT “RECORD/EDIT SETTINGS”
Press 3.
3 SELECT “VCR PLUS+ SETUP”
Press 7.
4 SELECT “VCR PLUS CHANNEL SETUP”
Press the right arrow key.
5 MAP YOUR CHANNELS
Using the worksheet on the following page,
determine the local equivalents of the VCR
Plus+ channels for your viewing area. You can
find this information in your local television
listings or by contacting your local cable com-
pany.
• Use the left/right arrow keys to move be-
tween channels and the 0-9 keys to select
channels.
• When finished, press MENU to save and
exit.
NOTE
• VCR Plus+ and PlusCode are registered trademarks of Gemstar
Development Corporation. The VCR Plus+ system is manufac-
tured under license from Gemstar Development Corporation.