Filter
Top Products
33
10 - Search
press
press
SEARCH MENU
1 Index Search/Scan
2 Blank Search
3 Direct Time Search
4 Return to 0:00:00
5 Manual CA Playback
/ = Move = Sel MENU = Quit
DECK ONE INDEX MENU
Index: - -
Scan: Press FF or REW
Search: 1-99 Then FF/REW
MENU to Quit
DECK ONE FORWARD SCAN
DECK ONE REVERSE SCAN
DECK ONE FORWARD SCAN
DECK ONE REVERSE SCAN
INDEX
SEARCH
1
TO SCAN
press FF or REWIND
press 01 - 99
then press FF or REWIND
TO SEARCH
INDEX SEARCH/SCAN
1 INSERT TAPE
Insert a videotape in Deck 1 or Deck 2.
• If the tape has a record safety tab, you
will see the menu at left.
• If the tape is missing the record safety
tab, please see MOVIE ADVANCE on
page 35.
2 OPEN “SEARCH MENU”
While the tape is stopped or playing, press
press SEARCH/INDEX.
3 SELECT “INDEX SEARCH/SCAN”
Press 1.
4 SEARCH/SCAN FOR INDEX MARKS
Choose one of the following:
Scan
Press FAST-FORWARD or REWIND to
begin scanning for Index Marks forwards or
backwards.
• When Index Scan locates an Index Mark, it
will play the tape for 5 seconds. If it is the
scene you want to watch, press PLAY . If
it is not, the VCR will automatically
search for the next Index Mark.
NOTE
• Auto Show Finder - Use Index Scan with the Date/Time Stamp to quickly find Timer Recordings on your
tapes. For example, when Index Scan stops at an Index Mark and plays a few seconds of tape, you will
see the date and time the show was recorded.
Follow these steps to locate recordings by
scanning or searching for Index Marks.
Search
Enter a number from 1 to
99; e.g. for “5” press “0-
5.” Then press FAST-
FORWARD or REWIND
to begin searching
forward or backward for
the specified Index Mark.
• When the VCR locates
the Index Mark, it will
play the tape.