Filter
Top Products
31
9 - COMMERCIAL ADVANCE
Follow these steps to remove all marked commercials
while making a copy of a taped TV show.
1 OPEN MAIN MENU
Press MENU.
2 SELECT “COPY SETTINGS”
Press 1.
3 SET “COMM. FREE COPY”
Press 1 to select from the following:
• On – The VCR will exclude marked commer-
cials while copying tapes.
• Off – The VCR will include marked commer-
cials while copying tapes.
• Auto – The VCR will automatically make a
copy of each TV program you record without
the marked commercials; see note below.
4 INSERT SOURCE TAPE
Insert the tape with marked commercials in
Deck 1.
5 INSERT THE TARGET TAPE
Insert the tape you are copying to in Deck 2.
6 COPY YOUR TAPE
Press COPY TAPE.
• The tape in Deck 1 will begin copying to Deck
2. Deck 2 will suspend recording whenever
Deck 1 locates a block of commercials.
• When copying is complete, the tape in Deck
2 will be commercial free!
1 Copy Settings
2 Playback Settings
3 Record/Edit Settings
4 Channel Settings
5 VCR Settings
6Timer Recording
7 Language/Langue
/ = Move = Sel MENU = Quit
press
press
MAIN MENU
COPY SETTINGS
1 Comm. Free Copy On
2 EZ Copy Off
3 Speed Matching On
4 Copy Audio Insert Off
5 Copy Mode Auto
/ = Move = Sel MENU = Quit
MENU
1
press
1
for Comm. Free Cop
y
NOTES
• The Commercial Free Copy function will only recognize commercial groups that have been marked by
COMMERCIAL ADVANCE.
• Auto Commercial Free Copy will be disabled if there is a Timer event scheduled on Deck 2.
AUTO COMMERCIAL FREE COPY
When “Comm. Free Copy” is set to “Auto,” each time a TV program finishes recording and marking
commercials in Deck 1, the VCR will automatically rewind Deck 1 to the start of the recording and copy
the program to Deck 2 without the marked commercials!
How it Works
1. Load a videotape with a record safety tab into each Deck.
2. Record a TV program in Deck 1 (standard recording, One-Touch recording or timer recording).
3. When recording is stopped in Deck 1 (or when the recording time has elapsed), the VCR will auto-
matically rewind the tape in Deck 1 to the start of the recording and mark all commercial groups.
4. Next Deck 1 will rewind again and copy the program to Deck 2 leaving out the marked commercials.
When Auto Commercial Free Copy is complete, both decks will stop at the end of the recorded
program—ready to record additional programs!