Filter
Top Products
22
DVD+VCR User’s Guide
RECORD SETTINGS
1 OPEN “SETUP MENU”
Press SETUP/ENTER.
2 SELECT “VCR & CHANNEL SETUP”
Use the UP/DOWN arrow keys to select
“VCR & Channel Setup,” then press the
RIGHT arrow key to select.
3 ADJUST RECORD SETTINGS
Use the UP/DOWN/RIGHT arrow keys to
select and set the following:
Date/Time Stamp
Timer – The date, time, and record
source will be “stamped” (superimposed)
briefly at the start of all timer recordings.
All – The date, time, and record source
will be stamped briefly at the start of all
recordings.
None – The date, time, and record
source will not be stamped.
Record Source
Set your VCR to record from the following
sources.
Auto – Whatever is currently visible on
screen.
Tuner – The DVD+VCR’s built-in televi-
sion tuner.
Line 1 – An external source, such as a
camcorder, connected to the front line
inputs.
Line 2 – An external source, such as a
satellite receiver, connected to the rear
line inputs.
DVD – A DVD playing in the DVD deck.
Follow these steps to set the default VCR
record settings for your DVD+VCR.
press
SETUP MENU
Set Timer Recording
Child Lock Off
Set Clock
DVD Setup
VCR & Channel Setup
Language/Langue/Idioma
/ To Move
To Select
RETURN to Quit
VCR & CHANNEL SETUP
Channel Setup
Date/Time Stamp Timer
Auto Play/Rewind Both
Record Source Auto
Panel Display Auto
To Move/ To Select
RETURN To Go Back
Select VCR & Channel Setup
Select Date/Time Stamp &
Record Source
SETUP
/ENTER