Filter
Top Products
ENGLISH
10
CONNECTION AND PREPARATION
---------------------------------------
Connecting an MP3 player or a
USB memory stick
GBP 7000 3D
Note:
7
The device must be switched off while the
USB connection is being made. If it is not
switched off, data can be lost.
1 Switch off the device by pressing »9«.
2 Connect the USB interface of the MP3 player
to the » « socket on the device, using a
standard USB cable;
or
insert the USB plug of the USB memory stick in
the » « socket on the device.
Notes:
7
To remove the MP3 player or the USB mem-
ory stick, switch off the device and pull out
the cable for the data medium.
7
The USB socket on the device does not sup-
port a connection for a USB extension cable
and is not designed for directly connecting
to a computer.
Connecting to the internet with
ethernet cable
GBP 6000 2D
BLU-RAY DISC PLAYER
GLR 5800
AC:110-240 V 50/60 Hz
POWER:17 W
~
SN
BD Player
Splitter
Telephone socket
Modem Router
1 Connect the Ethernet socket of the modem/
router to the »ETHERNET« socket of the de-
vice using a standard network cable (Twisted
pair, RJ45 plug).
– The data throughput level is 10/100 Mbit.
Connecting to the internet with
wireless antenna
1 To activate the »WLAN ANTENNA«, unplug
the network cable from the »ETHERNET«
socket.
– The leds on the »WLAN ANTENNA«
start blinking.
Note:
7
The network configuration and connection
method may vary depending on the equip-
ment in use and the network environment.
The player is equipped with an IEEE 802.11n
wireless module, which also supports the
802.11b/g standards. For the best wireless
performance, you should use IEEE 802.11n
certified WLAN network (access point or wire-
less router).