Filter
Top Products
ENGLISH
16
INITIAL SETUP
----------------------------------------------------------------------------------------------------------------------
10 Select »Secondary DNS« by using »A« or
»S« and press »ENTER«.
Enter the Secondary DNS by using the
number buttons.
Select »Ok« by using »S« and press
»ENTER« to confirm,
or select »Cancel« by using »s« and press
»ENTER« to cancel the setting.
11 Select »Apply« by using »S« and press
»ENTER« to confirm the setting;
or
select »Cancel« by using »s« and press
»ENTER« to cancel the setting.
12 If the connection is successful, »Network Test«
appears.
End setting by using »ENTER«.
Network settings by using
wireless connection
The device must be connected to a wireless
router with the WLAN Antenna.
Please see chapter "CONNECTION AND PREP-
ARATION".
Note:
7
The red led of the »WLAN Antenna« blinks
when the antenna is active and the blue led
blinks when the wireless connection is active.
1 Press »SETUP« to open the main menu.
2 In the main menu select »Settings« by using
»A« or »S« and press »ENTER« to confirm.
3 Select »Network« by using »A« or »S«
and press »ENTER« to confirm.
Settings
Parental
System
Display
Audio
Language
Network
BD-Live
Network List
Manual
IP Settings
Wireless
4 Select »Network List« by using »A« or »S«
and press »ENTER« to confirm.
– Display: The list of available wireless net-
works appears.
Settings
Parental
System
Display
Audio
Language
Network
BD-Live
Network List
WiFi Protected Setup (WPS)
Manual
Network Test
Wireless
Network List
5 Select the wireless network you like by using
»A« or »S« and press »ENTER« to confirm.
Note:
7
If the network is encrypted, the wireless
network password (security code WEP or
WPA) screen appears.
6 Press »ENTER«, the keyboard appears.
Select the first character of the password
(capital and small letters, numbers, symbols)
by pressing »A«, »S«, »a« or »s« and
confirm by pressing »ENTER«. Repeat the pro-
cedure for all characters.
After you finish entering all characters, select
the push button »OK« on the keyboard by
pressing »A«, »S«, »a« or »s« and press
»ENTER« to confirm.
Notes:
7
You can choose between numbers, lower and
upper case letters, and special characters.
7
If you make a mistake during entry, press
»A«, »S«, »a« or »s« to select the
push button » « and press »ENTER« to
confirm. The last character is deleted.
7 Select »Connect« to connect to the wireless
network by using »A« or »S«,
or select »Delete« by using »a« or »s« to de-
lete the wireless network from the list;
or select »Cancel« by using »a« or »s« to
cancel the setting;
or select »Disconnect« by using »a« or »s«
to disconnect from the wireless network;
and press »ENTER« to confirm.