Grundig GBP 7000 3D Blu-ray Player User Manual


 
ENGLISH
36
Auto open while reading
the disc.
The disc is dirty or any scratched.
The format of the disc is not supported.
Try to reset the device. To do so, press "8", wait for 5 seconds and
then press this button again.
Audio and video momen-
tarily pause while reading
disc.
The disc is dirty or scratched.
Check the TV system setting, switch PAL/NTSC TV system in setup menu.
Try to reset the device. To do so, press "8", wait for 5 seconds and
then press this button again.
The player is on with start
logo and menu but has no
image from the disc.
The disc is dirty or any scratch.
Try to reset the device. To do so, press "8", wait for 5 seconds and
then press this button again.
The unit freezes while rea-
ding CD-R/DVD-R disc
Reset the device, when you see “ loading ” on the screen, press » « to
take out the disc, clean the disc and try it again.
If the device freezes again, the disc may have some contents the de-
vice can't support. Please stop playing the disc in this device.
Audio and video momenta-
rily pause.
This occurs between playlist chapters or scenes ([AVCHD]).
When playing a title recorded on both layers, the unit automatically
switches between layers and plays the title in the same way as a
normal program. However, video and audio may momentarily cut out
when the unit is switching layers.
BD-Video or DVD-Video is
not played.
Ensure the disc is for the correct BD-Video region code or DVD-Video
region number, and is not defective.
You have set a parental level to limit BD-Video or DVD-Video play.
Change this setting.
Some BD-Video can only be output with HDMI.
Picture-in-picture is not pla-
yed with BD-Video.
Confirm whether the disc supports picture-in-picture.
No subtitles.
Subtitles are not recorded on the disc.
Turn the subtitles on. Set “Subtitle” on the on-screen menu to “ On ”.
Angle cannot be changed.
Angles can only be changed during scenes where different angles are
recorded.
The resume play function
does not work.
Memorized positions are canceled when
– pressing »7« several times.
– opening the disc tray.
The resume play function may not work depending on the disc.
INFORMATION
------------------------------------------------------------------------------------------------------------------