Filter
Top Products
26
Playback
Forward or Reverse
Playback
BD
DVD
AVCHD
VCD
1 During playback, press or to reverse
or forward playback.
2 Press the button repeatedly to switch
scanning speed (2x, 4x, 8x, 16x, 32x, 64x,
128x).
3 To resume to normal playback, press .
Some discs automatically resumes
normal playback when switching to a
new chapter.
Note:
You can also reverse or forward scan by holding
the button down. Normal playback resumes
when the button is released.
Notes:
When scanning BD, DVD, and VCD discs, no •
sound output is produced.
Sound is output during CD disc scanning.•
Playback Controls
Some discs start playing automatically after
the BD player loads the disc. If not, use the
remote control to start playback.
1 Press to start playback.
To pause, press
• .
To stop playback, press • .
To resume playback, press
• again.
2 When playback is finished, press to
open the disc tray.
3 Remove the disc, then press to close
the disc tray.
4 Press to turn off the BD player.
Resuming playback
»
Some discs do not support resume •
playback function.
When • is pressed, the point where
it stopped is saved in the BD player’s
memory. When is pressed, playback
resumes from the point where it stopped.
Unless due to the following conditions:
When the disc tray is opened.
•
When the BD player’s power is turned •
off.
To cancel resume playback, press •
twice.
WARNING
Do not leave the disc inside the BD player.