Filter
Top Products
53
Chapter 6
Troubleshooting
Use this chapter to find solutions to
some questions that may arise when
using your BD player.
No power. »
Check if the power cord is connected •
securely.
The POWER button is not pressed.•
Disc tray opens automatically.
»
The disc is scratched.•
The disc is dirty.•
The disc is not properly fit on the disc tray.•
Disc does not play / The front panel
»
display shows “NO DISC”.
The disc is turned over. Re-insert the disc •
with the printed side facing up.
The inserted disc is not supported.•
The region code of the disc does not match •
the BD player.
No picture is displayed.
»
The connection cords are not properly •
connected.
The connection cords are damaged. •
Replace with new ones.
Check the settings in the Display Settings •
menu.
Select the appropriate video input source •
of your TV.
The video output from the BD player goes •
through a VCR before it gets to your TV.
Connect the BD player directly to your TV.
The picture is not displayed properly.
»
Check the settings in the Display Settings •
menu.
Check if the video input signal source of •
your TV is set appropriately.