Hitachi 19VR11B TV VCR Combo User Manual


 
OPERATING CONTROLS AND FUNCTIONS
13
OPERATING CONTROLS AND FUNCTIONS
FRONT VIEW illustration
REMOTE CONTROL VIEW illustration
1 REC indicator - Flashes during recording. Lights up in the Stand-by mode for
Timer Recording.
2 Remote sensor window - Receives the infrared signals from the remote control.
3 POWER button - Press to turn TV/VCR on and off. Press to activate the automatic
timer recording.
4 STOP button - Press to stop the tape motion.
EJECT button - Press in the Stop mode to remove a tape from the TV/VCR.
5 REW button - Press to rewind the tape, or to view the picture rapidly in reverse
during the Play mode. (Rewind Search)
6 PLAY button - Press to begin playback of a tape.
7 F.FWD button - Press to rapidly advance the tape, or to view the picture rapidly in
forward during the Play mode. (Forward Search)
8 REC button - Press to begin manual recording.
OTR button - Press to activate One Touch Recording. (used on the TV/VCR
only)
9 VOLUME / buttons - Press to adjust the volume level.
10 CHANNEL / buttons - Press to select the channel for viewing or
recording.
PICTURE CONTROL function - They may also be used to adjust the picture
control. (See page 19.)
TRACKING +/- function - Press to minimize video 'noise' (lines or dots on
screen) during the Play mode. (See page 21.)
11 Cassette compartment
REAR VIEW illustration
12 MUTE button - Press to mute sound. Press it again to resume sound.
13 SELECT button - When setting program (for example: setting clock or timer
program), press to determine your selection and proceed to the next step you want to
input.
Display function - Press to display the counter or the current channel number and
current time on the TV screen. (See page 18)
14 MENU button - Press to display main menu on the TV screen.
15 SLEEP button - Press to set the Sleep Timer. (See page 32.)
16 TIME SEARCH button - Press to activate Time Search mode.
17 CM SKIP button - Press to skip a commercial range of playing tape.
18 SLOW button - Press to reduce the playback speed.
19 VCR PLUS+ button - Press to activate the VCR Plus function.
20 Number buttons - Press to select desired channels for viewing or recording. To
select channels 1 to 9, first press the 0 button and then 1 to 9.
+100 button - Press to select cable channels which are equal or greater than number
100. (To select channel 125, first press "+100" button then press "2" then "5").
21 ADD/DELETE button - Press to delete or add channel numbers in the Channel
Set Up mode (See page 14). Press to cancel a setting program (for example: setting
clock or timer program) (See page 28). (These functions are operative only when the
menu is shown on the TV screen.)
TAPE COUNTER RESET button - Press to reset counter to 0:00:00.
22 TAPE COUNTER MEMORY button - Press to set counter memory on and off.
(See page 23.)
23 PAUSE/STILL button - Press to temporarily stop the tape during the recording