Filter
Top Products
TIMER
52
Press CH (down) button repeatedly until "EVERY DAY" appears on the "DATE"
line. Press SELECT button.
For weekly recording: To record the TV program every week.
Press CH (down) button repeatedly until "EVERY" and your desired day of the
week appears together. Press SELECT button.
NOTE: To confirm or change the VCR plus+ code, press VCR PLUS+ button. You can
return to step [2].
4 Set the tape speed
Press CH (up) button until your desired tape speed appears. (Example: LP)
• You cannot use the TAPE SPEED button.
5 Exit the VCR plus+ mode
Press MENU or SELECT button.
To set another program, repeat steps [1] to [5].
6 Set the timer
Press POWER button to set VCR plus+ timer recording. The REC indicator lights up.
• You must turn off the TV/VCR to activate VCR plus+ timer recording.
If power is not turned off and you continue watching TV, "TIMER REC STANDBY"
starts flashing on the TV screen 2 minutes before the programmed start time.
TO CANCEL VCR PLUS+ TIMER RECORDING
• While setting a program; press MENU button to return to the TV mode.
• After setting a program;
1) Press POWER button.
2) Press MENU button to point to "TIMER PROGRAMMING".
3) Press CH
or button repeatedly until your desired program number appears.
4) Press ADD/DELETE button.
5) Press MENU button to return to the TV mode.
• While recording is in progress;
1) Press POWER button.
2) Press STOP/EJECT button on the TV/VCR.
If you press POWER button to turn off before the end time, timer recording will continued.
Refer to "After setting a program;" above to cancel it.
CHECKING START/END TIME OF AUTOMATIC TIMER AND
VCR PLUS+ TIMER RECORDINGS