Filter
Top Products
PREPARATION FOR USE
16
CABLE WITHOUT CONVERTER/DESCRAMBLER BOX
Use this connection if your cable system connects directly to your TV/VCR without a
converter box.
With this connection you, 1) can use your TV/VCR Remote Control to select
channels, 2) program one or more unscrambled channels for Automatic Timer
Recording.
Note to CATV system installer:
This reminder is provided to call the CATV system installer's attention to Article 820-40
of the NEC that provides guidelines for proper grounding and, in particular, specifies that
the cable ground shall be connected to the grounding system of the building as close to
the point of cable entry as practical.
CABLE WITH CONVERTER/DESCRAMBLER BOX
If your cable service supplies you with a converter box you can use the basic
connection shown here.
With this connection you can record and view any channel including scrambled
channels. However, channel selection must be made with the converter box. This
means that channels cannot be changed using the TV/VCR Remote Control.
Unattended recording is limited to one channel at a time.
TO RECORD AND VIEW A SCRAMBLED/UNSCRAMBLED CHANNEL
1. Set the TV/VCR channel selector to the output channel of the Cable Converter
Box. (Ex. CH3)
2. Select the channel to be recorded or viewed on the Cable Converter Box.
NOTE: When using a cable converter box, you can not record one channel and view