Hitachi 19VR11B TV VCR Combo User Manual


 
TIMER
48
10 Exit the program mode
Press SELECT button. Program 4 is now completed.
To set another program, repeat steps [1] to [10].
11 Set the timer
Press POWER button to set automatic timer recording.
The REC indicator lights up.
• You must turn off the TV/VCR to activate automatic timer recording.
If power is not turned off and you continue watching TV, "TIMER REC STANDBY"
starts flashing on the TV screen 2 minutes before the programmed start time.
TO CORRECT A PROGRAM
• While setting a program; press ADD/DELETE button to go back one step, and
enter correct numbers using CH or button.
• After setting a program;
1) Press POWER button.
2) Repeat steps [1] - [2].
3) Press SELECT button repeatedly (or press ADD/DELETE button to go back one
step) until a digit you want to correct flashes, then make changes
4) Repeat steps [10] and [11].
TO CANCEL AN AUTOMATIC TIMER RECORDING
• While setting or after setting a program;
1) Press POWER button.
2) Repeat steps [1] ~ [2] and select a program number you want to cancel.
3) Press ADD/DELETE button.
4) Press MENU button to return to the TV mode.
• While recording is in progress;
1) Press POWER button.
2) Press STOP/EJECT button on the TV/VCR.
If you press POWER button to turn off before the end time, timer recording will
continued. Repeat steps [1] ~ [2], select a program number you want to cancel and
press ADD/DELETE button. Press MENU button to return to the TV mode.