Filter
Top Products
PRESET FOR USE
21
PRESET FOR USE
The first time you may want to select language (English or Espanol=Spanish) and
preset the tuner to scan only the channels you receive in your area. You must use the
remote control for the following steps.
NOTE: Channel memory programming is not needed when using a
converter/descrambler box.
PRESET FOR THE FIRST TIME
1 Connect the TV/VCR power cord
Plug the TV/VCR power cord into a standard AC outlet.
2 Turn on the TV/VCR
Press the POWER button to turn on the TV/VCR.
3 Select "ENGLISH" or "ESPANOL"
Select "ENGLISH" or "ESPANOL=Spanish" using CH or button or SELECT
button. "[ ]" marks indicate the selected language.
4 Begin auto preset
Press MENU button to point to "AUTO PRESET"
Then press SELECT button. The tuner scans and memorizes in the active channels in
your area.
NOTES:
• The TV/VCR distinguishes between standard TV channels and CATV automatically.
• If you want to play or record a video tape BEFORE presetting the tuner, you must press
MENU button. To preset the tuner again, see "AUTO PRESET AGAIN".
5 After scanning
The tuner stops on the lowest memorized channel. (TV mode: from CH 02/ CATV
mode: from CH 01) You may want to recall the selected channels, you can select the
desired channel directly with the remote control number button or CH or .
TO RETURN TO TV MODE WHEN SCANNING
Press MENU button in scanning mode.