Filter
Top Products
MTS (Multichannel Television Sound) SYSTEM
18
MTS (Multichannel Television Sound) SYSTEM
CHECKING THE SELECTED MTS MODE
When you receive a signal from a tape or VCR tuner channel you are watching, the
status shown below will appear when you press SELECT button on the remote
control.
1] When a program broadcast in stere can be received, STEREO appears on the
TV/VCR screen.
2] When a program broadcast in second audio can be received, SAP appears on the
TV/VCR screen.
3] When a program broadcast both in stereo and second audio can be received,
STEREO/SAP appear on the TV/VCR screen.
NOTE: Although a program may be broadcast in both stereo and second audio, you
cannot record in both stereo and second audio at the same time.
4] While TV/VCR is set in HIFI stereo mode, HIFI appears on the TV/VCR screen
with PLAY. When PLAY pears from the TV/VCR screen, HIFI disappears from the
TV/VCR screen as well. While TV/VCR is set in monaural (MONO) mode, HIFI
disappears from the TV/VCR screen.
NOTE: If you play non-HIFI tapes while the TV/VCR is set in HIFI, HIFI will not
appear on the TV/VCR screen and the TV/VCR will play automatically in monaural.