Filter
Top Products
29
HOW TO USE THE REMOTE TO CONTROL YOUR TV
ቶ PICTURE-IN-PICTURE buttons
See separate section on pages 31-33 for a description.
SURF button
Press the SURF button to automatically scan all active channel numbers (those set in memory) and display them as PIP sub-
pictures. Press the SURF button a second time to remove the sub-pictures from the screen.
VID1 ~ VID5
When the remote control is in TV mode, press these buttons to directly select the video input sources between the five video inputs.
DAY/NIGHT button
Press this button to toggle between Day and Night picture mode settings. Select Day for day time viewing with more brightness
and contrast to compete with room light. Select Night for night time viewing with less brightness and contrast for a more detailed
picture (see page 43 for settings changes).
22
23
Ant A 28
TAKA
YPBPR:1
VID1
Stereo
ST/SA
Video:2
VID2
Video:4
VID4
Video:5
VID5
Video:3
VID3
VID 1 VID 2
VID 3
VID 4
VID 5
Ant
3:32 PM
Ant A 10
Stereo
R
3:32 PM
Ant A 10
Stereo
R
LAST CH
ት LAST CHANNEL (LAST CH) button
Use this button to select between the last two channels viewed (Good for watching two sporting events, etc.).
21
SURF
SURF
NOTES: 1. If no buttons are pressed when in SURF mode, auto-scanning will continuously scan channels in memory (see
page 55).
2. If a channel is changed during this SURF scanning, sub-pictures will be removed from the screen.
3. If MOVIE/TV RATINGS LOCK setting is ON, PIP SURF mode will be deactivated.
4. CLOSED CAPTION will not appear when PIP SURF mode is on.
5. While in SURF scanning mode, press SELECT on the remote control to stop on a chosen channel. Press SELECT
again to resume SURF scanning.
THE REMOTE CONTROL