Hitachi 65S700 Projection Television User Manual


 
SETUP
71
THUMB
STICK
SELECT
Move
SEL
Return
Model:
Dimensions (Inches) (mm)
Height: - / -
Width: - / -
Depth: - / -
Set The Clock
Magic Focus Tune Up
Setup
Set The Inputs
Move
SEL
Select
Set The Color System
Set Virtual HD
Set Black Side Panel
Menu Preference
Set Event Timer
Set Closed Captions
About Your TV
Setup
About Your TV
THUMB
STICK
THUMB
STICK
SELECT
Setup
Move
SEL
Return
About Your TV
Caution: Continuous on-screen
displays such as Video games, stock
market quotations, and other
fixed (non-moving) patterns can
cause permanent damage.
Such “SCREEN BURNS” are not covered
by your Hitachi Factory Warranty.
Caution
The TV model name and dimensions will be displayed on the TV screen. The dimensions of each TV model
are listed on page 76.
About Your TV
Select this feature to set and record digital channels from ANT C.
Set Timer
Recording
THUMB
STICK
SELECT
Upgrades
Set Timer Recording
Setup
Set Stand-By Mode
Move
SEL
Return
Set Monitor Out
Set Timer Recording
Setup
Record1 --:--AM --:--AM Jan.01, 2003
Ant C ------- DVHS1
Record2 --:--AM --:--AM Jan.01, 2003
Ant C ------- DVHS1
Record3 --:--AM --:--AM Jan.01, 2003
Ant C ------- DVHS1
Record4 --:--AM --:--AM Jan.01, 2003
Ant C ------- DVHS1
NOTE: Set the Time and connect the IEEE1394 devices before using this feature.
Use THUMBSTICK ̆, ̄ to highlight Record 1, Record 2, Record 3 and then press THUMBSTICK to select.
Use THUMBSTICK ̈, ̆, ̄ to highlight and select START TIME Hour/Minute.
Use THUMBSTICK ̈, ̆, ̄ to highlight and select START TIME AM/PM.
Use THUMBSTICK ̈, ̆, ̄ to highlight and select FINISH TIME Hour/Minute.
Use THUMBSTICK ̈, ̆, ̄ to highlight and select FINISH TIME AM/PM.
Use THUMBSTICK ̈ to highlight the MONTH.
Use THUMBSTICK ̆ to select a MONTH or THUMBSTICK ̄ to select Daily, Weekly - Sunday to Monday. Use THUMBSTICK ̇ to
return to MONTH.
Use THUMBSTICK ̈, ̆, ̄ to highlight and select the DAY of the MONTH.
Use THUMBSTICK ̈, ̆, ̄ to highlight and select the YEAR.
Use THUMBSTICK ̈, ̆, ̄ to highlight and select ANT C channel # to be recorded.
Use THUMBSTICK ̈, ̆, ̄ to highlight and select 1394 Device to be used.
Press down on THUMBSTICK to return and highlight Record 1.
A““ in the box means it is enabled.
ON-SCREEN DISPLAY