Hitachi 65S700 Projection Television User Manual


 
32
PICTURE-IN-PICTURE (PIP)
SPLIT MODE PICTURE-IN-PICTURE
Split Mode PIP displays the main picture and sub-picture evenly on the screen.
NOTE: The SWAP button will only operate in POP, PIP, and SPLIT PIP mode.
Main Picture
Sub Picture
NOTE: When in PIP SPLIT mode, if main picture and sub picture are in ANT C, the picture will always be the same.
PIP MODE button
To change between the available PIP modes (moving picture - SPLIT, POP or PIP; freeze picture - SPLIT, STROBE, MAIN and
SUB) press the PIP MODE button when PIP is ON. Each press of this button will change PIP to a different mode. Pressing
this button two times will cycle through both PIP modes.
a) Moving Picture
b) Freeze Picture
POP PIP SPLIT
YES x YES
YES x YES
xxYES
x xYES
x YES YES
x YES YES
YES X YES
NTSC (ANT A/B)
480i
480p
720p
1080i
Ant C (DTV) 16:9
Ant C (DTV) 4:3
PICTURE-IN-PICTURE (PIP) MODES
PIP MODE
4
PIP MODE
PIP MODE
PIP MODE
Freeze
Freeze
Freeze
PIP MODE
Freeze
Freeze
Freeze
NOTE: PIP modes will depend on the type of signal format
received.
POP PIP SPLIT STROBE
YES x YES YES
YES x YES YES
xxYES X
x xYES X
x YES YES X
x YES YES YES
YES x YES YES
NTSC (ANT A/B)
480i
480p
720p
1080i
Ant C (DTV) 16x9
Ant C (DTV) 4:3
FREEZE MODES
NOTE: Freeze modes will depend on the type of signal for-
mat received.
SWAP button (with PIP ON)
Press this button to toggle between the Main and Sub picture which is highlighted with a green border around the picture. Picture
sound and channel can be controlled when it is highlighted.
SWAP
SPLIT
THE REMOTE CONTROL