Filter
Top Products
52
CHANNEL MANAGER
Reception channels are shown at the left.
Refer to your cable or TV guide for channel identification standards.
When in ANT C, select Signal Meter when using an indoor or outdoor antenna. This feature will show the
signal strength and peak values of the Antenna signal to help you adjust your antenna to optimize signal
reception. If Auto Channel Scan is not performed first, you cannot use this feature and the screen below will
appear (see page 55).
Signal Meter
THUMB
STICK
SELECT
SEL
Close
Strength : 68
Peak : 71
Close
Move
SEL
Select
Source
Auto Channel Scan
Antenna Cable
Signal Meter
Move
SEL
Select
Source
Auto Channel Scan
Antenna Cable
Signal Meter
Execute Auto Scan First
Chan. Manager
Ant C (DTV)
Chan. Manager Chan. Manager
Ant C (DTV)
Signal Meter
ClearStart
Channel List
Ant C (DTV)
ClearStart
Channel List
Channel : 17-1
Press down on THUMB STICK to Close or press Exit to quit MENU.
NOTES: 1. The signal meter menu will automatically disappear after 30 seconds.
2. Weak signals will display a black screen (no video, no audio).
3. Antenna positioning must be accurate for best signal reception.
AIR CATV1 or CATV2
VHF 2~13ch
UHF 14-69ch
1~125
RECEPTION BAND
ON-SCREEN DISPLAY