Filter
Top Products
21
Hookup and Settings
If you forget your 4-digit code
If you forget your password, to clear the current
password, follow the procedure below.
1. Press SETUP to display the Setup menu.
2. Use the Number buttons to enter the 6-digit number
“210499”.
3. Select [Yes] then press ENTER. The 4-digit
password is cleared. Enter a new code.
Area Code
Enter the code of an area whose standards were used
to rate the DVD video disc, referring to the list (see
“Area Codes” on page 58).
1. Select [Area Code] option then press X.
2. Enter the password.
3. Follow step 2 as shown “Rating”.
4. Select the first character using the S / T
buttons.
5. Shift the cursor using X buttons and select the
second character using S / T buttons.
6. Press ENTER to confirm your area code selection,
then press SETUP to exit the menu.
Note:
There is no password set under the default factory
settings.
DivX
®
Registration Code
We provide you the DivX
®
VOD (Video On Demand)
registration code that allows you to rent and purchase
videos using the DivX
®
VOD service. For more
information, visit www.divx.com/vod.
1. Select [DivX Reg. Code] option then press X.
2. Press ENTER while [View] is selected and the
registration code will appear.
3. Use the registration code to purchase or rent the
videos from DivX
®
VOD service at www.divx.com/
vod. Follow the instructions and download the video
onto a disc for playback on this unit.
Note:
All the downloaded videos from DivX
®
VOD can only
be played back on this unit.
Recording Settings
Record Mode Set
You can set the picture quality for recording;
XP (High Quality), SP (Standard Quality),
LP (Low Quality), EP (Extend Quality).
1. Select [Rec Mode Set] option then press X.
2. Use S / T to select a desired Record Mode (XP,
SP, LP or EP).
3. Press ENTER to confirm your selection, then press
SETUP to exit the menu.
Record Aspect
When DVD recording, you can set the recording aspect
ratio to suit the material you’re recording (16:9 or 4:3).
Set [Rec Aspect] to match the aspect ratio of your TV.
DV Recording Audio
You need to set this if you have a camcorder using
32kHz/12-bit sound connected to the front panel DV IN
jack.
Some digital camcorders have two stereo tracks for
audio. One is recorded at the time of shooting; the
other is for overdubbing after shooting.
On the Audio 1 setting, the sound that was recorded
while shooting is used.
On the Audio 2 setting, the overdubbed sound is used.
TV Recording Audio
When TV recording with bilingual, you can choose
audio channel to record.
[Main+Sub] Main language and Sub language
[Main] Main language only
[Sub] Sub language only
DivX
01EN01DVDS253A(AU).book Page 21 Wednesday, June 7, 2006 3:39 PM