Filter
Top Products
–
14
–
EN
1L25
Notes
¡
When using a AV amplifier with a built in decoder (AV control centre) or Dolby Digital or DTS decoder as shown
in the Method 2, set
“
DOLBY DIGITAL
”
or
“
DTS
”
to
“
BITSTREAM” accordingly for audio output in the setup
mode. (See page 29.) Set “DOLBY DIGITAL”to "PCM" or “DTS” to “OFF” if the decoder is not used. Playing
a DVD using incorrect settings may generate noise distortion, and may also damage the speakers.
¡ The audio source on a disc in a Dolby Digital 5.1 channel surround format cannot be recorded as digital sound
by an MD or DAT deck.
¡
Set “Dolby Digital” to “PCM” and “DTS” to “OFF” for audio output in the setup mode for connecting to an MD
deck or DAT deck. (
See page 29.)
• Method 1 DVD/VCR + Stereo system
• Method 2 DVD/VCR + Dolby Digital decoder or DTS decoder
If your TV does not have A/V terminals:
1. Connect the DVD/VCR to a TV using RF cable (see DVD/VCR TO TV CONNECTION).
2. Select channel 3 on your TV.
3. Insert a pre-recorded tape into the unit.
4. Press OUTPUT on the DVD/VCR.
¡
If VCR OUTPUT light lights up and “VCR” appears on the front panel display. If not, press DVD/VCR on the remote control.
5. Press PLAY.
¡ If noise appears, it means channel 3 is already occupied for broadcasting. In such case, change the RF
output channel of the DVD/VCR to channel 4 with the following steps.
If channel 3 is already occupied for broadcasting,
1. Press PLAY once.
2. After a few seconds, press PLAY button on the DVD/VCR for 3 seconds.
¡ The RF output channel will be changed to channel 4 and you will see a playback picture. “ch4” appears
in the front panel display.
¡ If a picture does not appear, repeat these steps.
¡ If there is a power failure or the DVD/VCR is unplugged for more than 30 seconds, the RF output chan-
nel setting will return to channel 3.
RF OUTPUT CHANNEL
LR
VCRDVD/VCR
AUDIO IN
VIDEO IN
AUDIO OUT
VIDEO OUT
LL
RR
DIGITAL
AUDIO OUT
or
COAXIAL
AUDIO
OUT
DVD
S-VIDEO
OUT
COMPONENT
VIDEO OUT
L
Y
C
B
/
P
B
C
R
/
P
R
R
Stereo system
DIGITAL
AUDIO OUT
COAXIAL
AUDIO
OUT
DVD
S-VIDEO
OUT
COMPONENT
VIDEO OUT
L
Y
C
B
/
P
B
C
R
/
P
R
R
COAXIAL
AUDIO
DVD/VCR
Method 1
(Analog)
AUDIO OUT
DIGITAL
AUDIO OUT
Method 2
Dolby Digital decoder,
DTS decoder, MD deck
or DAT deck
CONNECTION TO AN AUDIO SYSTEM
H9651UD.qx3 04.3.2 8:54 PM Page 14