Filter
Top Products
–
30
–
EN
1L25
Adjust the Black Level Settings to make the black
parts of the picture as bright as you prefer.
1 Press MODE during playback.
2 Press ENTER to switch ON/OFF.
ON: Makes the dark parts brighter.
OFF: Shows the original picture as recorded.
3 Press MODE twice or RETURN to exit.
¡The setting will be saved even if the player is
turned off.
DVD
BLACK LEVEL SETTING
You can enjoy surround-sound effect over two speak-
ers.
1 Press SURROUND during playback.
2 Press SURROUND to set it 1 (Natural effect)
or 2 (Emphasized effect) or OFF.
3 Press MODE or RETURN to exit.
¡The setting will be saved even if the DVD/VCR is
turned off.
Notes
¡Virtual Surround will not be effective if the sound
mode is set to something other than STEREO (for
CD play only).
¡Turn down the level or turn it “OFF” if the sound is
distorted.
MP3CD
DVD
VIRTUAL SURROUND
ON
OFF
You can change certain aspects of the DVD display
screens, on-screen messages and the display panel on
the front of the DVD/VCR.
1 Press SETUP in STOP mode.
2 Press Arrow (s/B) to select CUSTOM, then
press ENTER.
¡CUSTOM mode will appear.
3 Press Arrow (s/B) to select DISPLAY, then
press ENTER to con-
firm.
4 Press Arrow (K/L) to select the below
items, then press ENTER.
TV ASPECT:
¡Press Arrow (K/L) for an item selection, then
press ENTER.
¡4:3 LETTER BOX displays a theater-like image.
Black bars appear at the top and bottom of the
screen.
¡4:3 PAN-SCAN is the traditional TV mode with a
full height picture with both sides trimmed.
¡Select 16:9 WIDE if a wide-screen TV is connected
to the DVD player.
¡The default setting is 4:3 LETTER BOX.
STILL MODE :
¡Press K or L for an item selection (AUTO, FIELD
or FRAME), then press ENTER.
¡Select “AUTO” usually.
¡If you select FIELD, pictures in the still mode will
be stabilized although they will be coarse due to lit-
tle amount of data.
¡If you select FRAME, pictures in the still mode will
be highly defined although they will be blurred due
to output of two fields at the same time.
¡The default setting is AUTO.
ANGLE MARK:
¡Press ENTER repeatedly to turn Angle mark ON or
OFF.
¡The default setting is ON.
LOGO:
¡Press ENTER to switch ON (opening picture)/
OFF(black).
¡The default setting is ON.
5 Press SETUP to exit.
Notes
¡Be sure to press SETUP, or the setting will not work.
QUICK
DISPLAY SETTING
DISPLAY
TV ASPECT 4:3 L-BOX
STILL MODE AUTO
ANGLE MARK ON
LOGO ON
H9651UD.qx3 04.3.2 8:54 PM Page 30