Filter
Top Products
–
24
–
EN
1L25
TRACK SEARCH
There are three ways to begin playback on an Audio
CD, MP3 or JPEG disc at a specific Track.
Using the Number buttons
1 Press the Number buttons to enter the
desired Track number.
¡Playback will start at the selected track.
JPEGMP3
CD
ZOOM
The Zoom function allows you to enlarge the video
image and to pan through the enlarged image.
1 Press ZOOM during playback.
¡Playback will continue.
2 Press ZOOM repeatedly to select the
required zoom factor: x2, x4 or OFF.
3 Use the Arrow (K/L/s / B) to move the
zoomed picture across the screen.
4 To exit zoom mode, press ZOOM.
Notes
¡Zooming function does not work while disc menu is
shown.
¡x4 zoom is not available on some discs.
¡Only x2 zoom is available on JPEG.
JPEGDVD
¡For single digit tracks (1-9), press a single number
(eg. track 3, press 3).
¡To play track 26, press +10, 2, 6 on the Number but-
tons.
Using SEARCH MODE
1 Press SEARCH MODE.
¡The track search display appears.
2 Within 30 seconds, select a desired track
number using the Number buttons.
¡For single digits press 0 first if the total tracks on the
disc are 10 or more.
¡Playback will start at the selected track.
¡Press CLEAR/C.RESET to erase the incorrect input.
Using SKIP
H
,
G
¡During playback, press SKIP G to move the next
track. Press it repeatedly to skip subsequent tracks.
Press SKIP H to go back to beginning of the current
track. Press it repeatedly to go to the previous tracks.
¡Track number will appear briefly in the front display
panel.
¡If SKIP HGis pressed while the playback is
paused, the playback will be paused again after skip-
ping to the next track.
Note
¡SKIP HGare not available when playback is
stopped.
TITLE / CHAPTER SEARCH
1 During playback, press SEARCH MODE
repeatedly until you see the Title or Chapter
search screen.
2 Enter the desired chapter/title number using
the Number buttons.
¡Playback will start at the selected Chapter or Title.
¡Press CLEAR/C.RESET to erase the incorrect input.
¡For single digits, press 0 first if the total tracks on
the disc are 10 or more.
DVD
_/2
TIME SEARCH
1
During playback, press SEARCH MODE repeat-
edly until the Time Search screen appears.
2 Within 30 seconds, enter a desired disc
time using the Number buttons.
¡Playback will start at the specified time.
¡Press CLEAR/C.RESET to erase the incorrect input.
Note
¡When there is no need to enter a number, “0”
appears automatically. For example, “0:0_:_ _”
appears in the Time Search display if the total time
of the disc is less than 10 minutes.
CD
DVD
SLOW FORWARD /
SLOW REVERSE
1 During playback, press PAUSE/STEP.
2 Press g or h.
¡ Slow motion playback will begin and sound will be
muted.
3 Press g or h.
¡ Slow forward or reverse speed is different depend-
ing on the disc. Approximate speed is
1(1/16),2(1/8),3(1/2).
4 To return to normal playback, press PLAY.
Note
¡
Set STILL MODE to FIELD on the Display menu if pictures
in the slow playback mode are blurred. (refer to page 30)
DVD
H9651UD.qx3 04.3.2 8:54 PM Page 24