Hitachi DV PF74U DVD VCR Combo User Manual


 
26
EN
1L25
RANDOM PLAYBACK (CD)
SLIDE SHOW MODE
This shuffles the play order of tracks instead of play-
back of the original sequence.
1 In stop mode, press MODE repeatedly until
the RANDOM
screen appears.
2 Press PLAY to start random playback.
Note
¡To repeat the current track in the random selection,
press REPEAT repeatedly until TRACK appears
during playback. To repeat the entire random selec-
tion press REPEAT repeatedly until ALL appears
during playback.
CD
PLAY
CD-DA TOTAL 0:45:55
RANDOM PROGRAM
--no indication--
RANDOM
Insert an MP3 or JPEG disc, then press MENU to call
up the MP3 menu on the TV screen.
1 In stop mode, press Arrow (K/L) to select
the desired group track.
¡If a group is selected,
press
B
or ENTER to go
on to the track selection
screen. Press Arrow (K/L)
to choose a track, then
press
B
or ENTER.
¡If a track is selected,
press PLAY or ENTER to start playing tracks.
Starting from the one you’ve just chosen the subse-
quent tracks will be played.
¡Press TOP MENU to return to the first item.
2 Press STOP to stop playback.
Notes
¡Folders are known as Groups; files are known as
Tracks.
¡Folders are accompanied by icon.
¡MP3 files are accompanied by icon.
¡JPEG files are accompanied by icon.
¡Maximum of 255 folders can be recognized.
¡Maximum of 512 files can be recognized.
¡Up to 8 hierarchies can be created.
This DVD/VCR recommends the use of files record-
ed at the below specifications:
¡Sampling frequency: 44.1kHz or 48kHz
¡Constant bit rate: 112kbps ~ 320kbps.
JPEG
MP3
MP3 / JPEG PLAYBACK
PLAY
ENTER
FILE LIST
FOLDER
MP3
JPEG
DISC NAME
folder name 1
folder name 2
folder name 3
folder name 4
file name 1
file name 2
file name 3
folder name 1
1/2
PROGRAM (CD)
You may determine the order in which tracks will play.
1 In stop mode, press MODE.
¡The PROGRAM screen will appear.
2 Press Arrow (K/L) to select a track, then
press ENTER.
¡Press CLEAR/C.RESET
to erase the most recently
entered program.
3 Press PLAY to play the programmed tracks.
Notes
¡Press STOP once and then PLAY again, playback
will restart from the point where STOP was pressed.
¡Press STOP twice and then PLAY. Playback starts
from the first track in the original order. However,
the program can be called back when you follow the
above steps. Your programs will be stored unless
either the disc tray is opened or power is turned off.
¡Up to 99 programs can be entered.
¡To repeat the current track in the program, press
REPEAT repeatedly until TRACK appears during
playback. To repeat the entire program, press
REPEAT repeatedly until ALL appears during
playback.
¡To erase all programs at once, select ALL CLEAR
and press ENTER at step 2.
CD
CD-DA TOTAL 0:08:00
ENTER
ALL CLEAR
8 3:30
8 3:30
9 2:30
10 1:30
2/2
You can switch to the slide show mode during play-
back.
1 Press MODE during playback.
¡The slide show mode screen will appear.
¡The slide show mode cannot be switched when it is
stopped, or from the file list screen.
2 Press ENTER.
¡The slide show mode will change.
CUT IN/OUT:
The entire image appears in one time.
FADE IN/OUT: The image appears gradually and
then disappears.
3 Press MODE to exit.
JPEG
H9651UD.qx3 04.3.2 8:54 PM Page 26