Filter
Top Products
SETTING THE CLOCK -AUTOMATIC MODE WITH CABLE BOX
26
SETTING THE CLOCK -AUTOMATIC MODE WITH CABLE BOX
If your VCR is hooked up to a cable box (Hookups [E], [F] or [G])
Note: Turn on the cable box before setting.
1 Turn on the TV and select the video channel (3 or 4).
Or, if you are hooked up with an audio/video cable, set the TV to AUX or VIDEO.
2 Press the GUIDE button.
The main on-screen menu will appear on the TV screen. Click to see remote control
illustration.
3 Press the (3) button to bring up the CLOCK SET menu.
4 Make sure that item 1 is highlighted "CLOCK SET <AUTO>".
• If "CLOCK SET <MANUAL>" is highlighted, press the (1) button to switch it to "CLOCK SET
<AUTO>".
5 Press the (2) button.
This screen appears to show that the clock is being set.