Filter
Top Products
CABLE BOX SETUP
36
CABLE BOX SETUP
Note: This setup should be performed if you receive all channels through a cable box
(Hookups [E], [F] or [G]).
The VCR can be programmed to:
Automatically select channels on the cable box during a timer record or VCR Plus+ delayed
recording operation.
Change channels on remote controlled cable boxes with the VCR remote control.
BEFORE YOU BEGIN...
Make sure the cable box is positioned properly on the VCR.
1 Turn on the TV and select the video channel (3 or 4).
Or, if you are hooked up with an audio/video cable, set the TV to AUX or VIDEO.
2 Press the GUIDE button. Click to see remote control illustration.
The main on-screen menu will appear on the TV screen.
3 Press the (4) button to select the CHANNEL PRESET operation.
4 Press the (1) button to select <CATV2>.