Filter
Top Products
USING THE VCR PLUS+ SYSTEM FOR RECORDING
66
USING THE VCR PLUS+ SYSTEM FOR RECORDING
About the VCR Plus+ system
This handy feature makes timed recording a snap. You don't need to enter the specific
channel, date, time or duration of a program. All you enter is its PlusCode programming
number - a number of up to eight digits. This special code is easy to find in your favorite TV
program guide or daily newspaper. Here's a sample page from TV Guide showing PlusCode
numbers next to each program.
Your local channels may be different from the VCR Plus+ channel codes. To get ready to
record with the VCR Plus+ system you need to assign your local broadcast and cable channel
numbers to the VCR Plus+ channel codes already stored in your VCR's memory. This is called
channel setup and you do it using the on-screen Easy Guide System and the following step-
by-step instructions. Then you will be ready to begin VCR Plus+ recording, also using the on-
screen Easy Guide System.
VCR Plus+ and PlusCode are trademarks of Gemstar Development corp.
Channel setup
Before you begin
1 Look for a listing like this one in your local TV program guide or Sunday newspaper TV
section. Notice the small numbers to the right of the station name.
These are the VCR Plus+ channel numbers that you will use in the channel setup procedure.
2 Make a list of the VCR Plus+ channel numbers and the channel numbers you are receiving
them on. If there are any differences, YOUR channel numbers must be assigned to the
corresponding VCR Plus+ number. (See Example)