Filter
Top Products
CABLE BOX SETUP
39
Note: Only the cable box will change channels. The VCR channel will not change.
Cable box did not tune to channel 9: Press the (2) button to return to step 10, and enter
a different code number.
If the codes you entered do not work:
• Try repositioning the cable box on top of the VCR and reentering the codes.
• Try entering all code numbers (00 - 61). Press number buttons to enter another code number.
If none of the codes work, press the GUIDE button to quit. The VCR will not control your cable
box. However, the output channel of the cable box has been set. Turn on the cable box and
leave it tuned to the channel you want to record before the recording is scheduled to begin.
Note: If you make a mistake when entering digits, press the CLEAR button repeatedly to
return the white dash "-" to the digit to be corrected. Then, punch in the correct number.