Filter
Top Products
PLAYBACK
40
PLAYBACK
To playback a recorded tape
1 Turn on the TV and select the video channel (3 or 4).
Or, if you are hooked up with an audio/video cable, set the TV to AUX or VIDEO.
2 Insert a recorded tape.
The power comes on automatically and the tape indicator lights on the display.
• When a cassette without its safety tab is inserted, playback starts automatically.
3 Press the PLAY button to start playing the tape. Click to see remote control illustration.
4 Press the STOP button to end playback.
Rewinding the tape
When the video cassette reaches the end of the tape, the VCR will stop automatically
and rewind the tape.
• If you press the POWER button while the tape is rewinding, the power will not shut off until
the tape has been completely rewound.
You may also rewind the tape manually at any time.
Manual Rewind
1 Press the STOP button to end playback. Click to see remote control illustration.
2 Press the REW button.
The VCR rewinds the tape all the way to the beginning, then stops.
• Press the EJECT button on the VCR to eject the tape.