Hitachi VT-UX717A VCR User Manual


 
Basic Operations (Playback)
33
OFF: Specify OFF so that noise is less when viewing tapes played repeatedly, e.g. rental
tapes, etc., or when using this VCR for playback to copy a tape.
Rewinding the Tape
When you are done watching a video, you can rewind the tape automatically or manually. If
the video cassette reaches the end of the tape, the VCR will stop and automatically rewind the
video cassette. If you press POWER while the tape is rewinding, the power will shut off
automatically after the tape has completely rewound.
Manual Rewind
Press STOP and REW. The VCR rewinds the tape all the way to the beginning, then stops.
Press EJECT on the VCR to release the tape.
Movie Return
If your videocassette has the safety tab removed, the VCR will stop and automatically rewind
the videocassette, eject it, and turn off the power when it reaches the end of the tape or a
blank section of tape which lasts for more than 30 seconds.
This function works only in PLAYBACK mode, not in RECORDING mode.
Special Playback Effects
Visual Search
This function lets you search backward and forward through the videotape while viewing it.
Using the buttons on the remote control:
 Press PLAY and then REW to search in reverse.
 Press PLAY and then F.FWD to search ahead.
 Press PLAY again to return to to normal playback.
Press REW or F.FWD and hold it; you can search backward or forward through the tape at a
higher speed while viewing it.
 Press PLAY and REW, then hold REW for backward search at a higher speed.
 Press PLAY and F.FWD, then hold F.FWD for forward search at a higher speed.
 Release REW or F.FWD to return to normal playback
Still Playback (Pause)
Press PAUSE on the remote control or PLAY/STILL on the VCR to still the tape during play.
The picture will "freeze". You may see some minor noise or interference on the screen. This
is normal.
After 1 minute in PAUSE mode, the VCR automatically switches to STOP mode to protect the
tape.
If noise bars appear on the TV screen during PAUSE mode, first set the VCR to SLOW mode
by using the SHUTTLE dial and then press the CHANNEL up or down button to minimize the
noise bars.
If the screen jitters during PAUSE, press the CHANNEL up or down button to minimize it.
To resume play, press PLAY or PAUSE again.
Skip Playback
While playing back your tape you can skip forward by pressing SKIP. The tape will search