Filter
Top Products
Basic Operations (Tape Navigation)
59
Steps 3 and 4.
5. Press GUIDE after you finish reviewing tape data.
Cautions and Reference for Tape Navigation
VCR's displays:
When you insert one of tapes - below, REM flashes in the VCR's display.
Non-recorded tape
Tape recorded by another VCR
Tape recorded with TAPE NAVIGATION <OFF>
Tape whose tape data has been deleted
Screen displays:
When the MENU button is pressed with tapes - loaded, the following screens will
appear.
When the tape data memory becomes full, the following screens will appear when a
recording is made or when the timer is programmed. Delete unnecessary tape data (See page
65).
Dubbing:
Tape Navigation does not operate with tapes on which only audio is recorded or dubbed
from a CDV (compact disc video).
Contents of data stored in memory when pause is engaged during recording:
The program number does not change even if pause is engaged during recording. If the
channel is changed after pause is instructed, the program number will change.
Tape data when a new recording is made on a recorded tape:
Example 1
If you record program D on the tape where programs A and B were recorded using Tape
Navigation for the same duration of time as program A: